Product Overview
The Swage-Right - Swager Light-Duty Single Cavity - 1/16" Wire Rope is a versatile tool for light-duty swaging and crimping. It has a single cavity design for accurate results.
Swaging is a machine tool crimping process that attaches wire rope and aircraft cable end fittings. Swaging can also form loops by running the end of the wire back on itself.
Swage-Right - Swage-It - Compact Light-Duty Swager for 1/16" Wire Rope is portable, durable, and has a precise single cavity design.
SWAGE-IT TOOLS are precision manufactured of steel. Tools are plated for maximum rust protection and are pre-lubed for working ease. They are compact and easy to store. When a copper or zinc plated copper oval sleeve is swaged properly with a "SWAGE-IT tool the fitting will hold the rated strength. When using the 1/16" or 3/64" tool for loop ends one oval sleeve will hold the full strength on 7x7 or 7x19 cable. On 1x19 cable use two sleeves at each end to hold the rate strength.
A small, single cavity swager with sharp side cutters designed for light duty swaging use on wire rope fittings.
- For 1/16" diameter wire
Items of Note:
- ALWAYS STRENTH TEST CABLE PRIOR TO USE
- WHEN DESIGNING A CABLE ASSEMBLY USE A 5:1 SAFETY FACTOR
- IF THE BREAKING STRENGTH OF THE CABLE IS 2000 LBS. THEN THE MAXIMUM LOAD TO WHICH THE CABLE IS SUBJECTED SHOULD NEVER EXCEED 400 POUNDS.